Ways to manage risks are called ‘control measures.’ The control measures needed will depend on your workplace, even if the hazard is the same. When you identify a hazard, a risk assessment can help work out what could happen if someone is exposed to the hazard and what control measures should be used, including:
- how serious a risk is
- if current control measures are working
- what action is needed to control the risk
- how urgently action should be taken.
You can also use a risk assessment to help review control measures to make sure they work as planned.
Good work design and planning principles
The most effective way to control risk is to start identifying hazards and assessing risks before the work starts, and by following good work design and planning principles. Good work design and planning are very effective at eliminating and minimising risks because early stages present the most opportunities to “design-out” hazards and “design-in” control measures. For example, designing the layout of the workplace to be on one floor would eliminate the need for stairs, and would prevent workers from being exposed to hazards associated with stairs.
For more information on good work design and planning see the handbook: Principles of Good Work Design.
Hierarchy of control measures
The ways of controlling risks are ranked from the highest level of protection and reliability to the lowest. This ranking is known as the hierarchy of control measures. You must always aim to eliminate the risk, which is the most effective control. If this is not reasonably practicable, you must minimise the risk by working through the other alternatives in the hierarchy.
The hierarchy of control measures, in order, are:
- Elimination
- Substitution
- Isolation
- Engineering
- Administrative
- Personal protective equipment
The hierarchy of control measures can be applied to any risk, not just risk of slips, trips or falls. See the model Code of Practice: How to manage work health and safety risks for more detailed information.
Elimination
Elimination is the most effective control measure. Removing the hazard removes the risk around it. This is easiest to do when a workplace is being designed. For example, having everything on the same floor eliminates the need to have stairs, which means there is no risk of falling down stairs.
Substitution
Substituting the hazard for something safer can be an effective control measure. For example, replacing slippery flooring with a slip-resistant surface.
Isolation
Isolation involves physically separating the source of harm from people by distance or barriers. For example, putting caution tape around a slippery surface to prevent people walking on it.
Engineering control measures
An engineering control measure is physical in nature, such as using a mechanical device or process. For example, marking the edge of a step with a high contrast colour and different texture to the rest of the step (e.g. a strip of rougher slip-resistant material which is high visibility yellow).
Administrative control measures
If there is still a risk after you have applied all reasonably practicable elimination, substitution, isolation and engineering control measures, apply administrative control measures such as:
- scheduling good housekeeping (e.g. keeping accessways clear)
- having clear policies for immediate clean-up
- providing information, training and instruction on methods and procedures for dealing with hazards.
Administrative control measures should only be used after other types of higher control measures because administrative control measures rely on an individual’s behaviour and supervision, and do not control the hazard at the source, so they are less effective.
Personal Protective Equipment
If all the other control measures have been applied and there are still risks, use personal protective equipment (PPE). PPE is the least effective control measure, because it does not control the hazard itself.
Under the model WHS regulations, the PCBU must ensure workers are provided with suitable PPE if it is used to minimise a risk to health and safety in the workplace. PPE needs to be suitable for controlling that particular risk and be maintained, repaired and replaced when necessary. The PPE needs to fit correctly and be in good condition to be effective. For example, shoes with special grip need to be the right size and replaced when the tread gets too worn down.
See Overview: Personal protective equipment for more information on PCBU and worker duties regarding PPE.