Hazards often appear together. For example, if your workplace has an outdoor staircase, you will need control measures for both stairs and the outdoor environment (such as rain that may introduce a slip hazard).
Floors and surfaces
Floors should be appropriate for all expected work activities and conditions and be regularly inspected and maintained to eliminate or minimise slip, trip and fall risks. Some control measures include:
- designing the floor to minimise risks, e.g. location of drains
- measuring slip resistance
- choosing floor coverings appropriate for the work activities, level of foot traffic, performance in both wet and dry conditions, and
- treatments to improve grip or slip resistance.
Outdoor and extreme environments
Some factors to consider include:
- exposure to the elements, including rain, mud, and humidity
- when selecting trees and plants that will be near paths, avoid those which drop a lot of seeds, leaves or sap
- spot checks for when wind may have blown leaves or branches onto paths
- sufficient lighting where outdoor areas may get dark, e.g. car parks
- floor treatments for icy or humid workplaces, e.g. freezers, kitchens, indoor pools.
Ramps and stairs
There is a higher risk of slips, trips and falls when using stairs or ramps because a person will usually need more concentration and physical energy to use them safely, compared to flat surfaces. Control measures for ramps and stairs include:
- appropriate slope (i.e. not too steep) or tread
- contrasting colours and/or textures at entries and exits
- handrails on at least one side, which extend slightly past the exit
- upper and lower handrails on open sides, and
- extra handrail in the centre on a very wide staircase.
Lighting
Slip, trip and fall risks are greater when they are unexpected and cannot be easily seen, including when they blend into the surroundings. Ensuring the workplace is well-lit means that suitable lighting provides an even distribution of adequate light with minimal glare, shadows or reflections. In addition to having “enough lights” consider:
- minimising lighting contrast in transition areas, e.g. when moving from bright light outdoors to an indoor stairwell
- regularly cleaning light fixtures to minimise dust and dirt buildup
- using lights with movement sensors if people will only be in the area some of the time or when there is low light
- adjusting the operating hours of outdoor lighting to reflect seasonal changes and daylight savings, and
- minimising reflective surfaces by using matte paint or installing floor mats.
See the model Code of Practice: Managing the work environment and facilities for more information.
Furniture
Slips, trips and falls can occur when a person needs to move to avoid furniture they did not see or the furniture moves in an unexpected way. Some control measures include:
- ensuring furniture is stable and in good condition (e.g. no wobbly legs)
- using anti-slip pads for the feet of furniture on a hard floor (e.g. tiles)
- castors with brakes or cups on wheeled furniture if it is used on a hard floor (e.g. office chair on a wooden floor)
- providing enough lighting so furniture is clearly visible, especially low furniture (e.g. coffee tables and ottomans)
- providing enough room to move around and between furniture, and ensure it is placed away from emergency exits, swinging doors and blind corners.
Falls can also occur when a person uses furniture to help them reach something instead of using a step stool or ladder.
Ladders
When assessing the risks of using a ladder, consider whether it is suitable for the work activity, how long the worker will be on the ladder, the physical surroundings, and the weather (if the work is conducted outside). In some circumstances, additional safety precautions may be needed, e.g. if the ladder is in a doorway or beside a railing, or very wet or windy conditions, or two-handed tools are being used. See model Code of Practice: Managing the risks of falls at workplaces for more information on additional precautions.
High job demands and psychosocial hazards
Psychosocial hazards are aspects of work that have the potential to cause physical or psychological harm. They may interact or combine with other hazards to change, increase, or create new risks. For example, time pressure can cause fatigue. Time pressure can lead to a worker feeling rushed and pressured to ‘cut corners’, which can increase the risk of slips, trips and falls.
Some control measures for time pressure include:
- assessing workload correctly and setting realistic deadlines or quotas
- having appropriate staff levels for the workload, taking into account skill and experience as well as number of staff, and
- providing sufficient breaks between and during shifts.
Many control measures for time pressure and fatigue overlap in managing the risk of psychological harm. Jobs requiring intense concentration or high mental effort can create a risk of fatigue, even when a worker has slept well and has not worked a long shift. Some control measures include:
- incorporating enough time to support high emotional job demands, if appropriate (e.g. for paramedics, firefighters, police), and
- assigning work with a mixture of fast and slow pace, and high and low levels of concentration.
Fatigue can increase the risk of slips, trips and falls by reducing a person’s ability to identify and react to potential hazards in time, as well as controlling themselves physically in their usual way. Some control measures include:
- minimising long, irregular, or night shifts where reasonably practicable
- making the environment a comfortable temperature for the work being done, and
- monitoring for signs of fatigue and using automated systems to prevent fatigue-related errors.
More information can be found at Managing the risks of fatigue at work.