20 March 2020 |
Model Codes of Practice
This model Code of Practice provides guidance on managing the risk of a falls by a person from one level to another that is reasonably likely to cause injury.
It applies to all workplaces covered by the Work Health and Safety (WHS) Act and WHS …
Document
- Cranes
- Identify, assess and control hazards
- Model WHS Laws
- Safe design
- Slips, trips and falls
- Working at heights
- Managing health and safety
- Model Work Health and Safety Laws
- The work environment
Page last updated: 09 Jun 2022
20 March 2020 |
Model Codes of Practice
This model Code of Practice provides guidance on managing risks associated with excavation work.
This Code applies to all types of excavation work, including:
bulk excavations more than 1.5 metres deep
trenches
shafts
tunnels.
Excavation…
Document
- Model Work Health and Safety Laws
- Plant, equipment and structures
- Safety by industry and business
Page last updated: 06 Dec 2021
01 October 2018 |
Model Codes of Practice
Use this model Code of Practice if you design structures that will be used, or could reasonably be expected to be used, as a workplace. This includes architects, building designers and engineers.
This model Code is also relevant for anyone making…
Document
- Cranes
- Demolition
- Good work design
- Identify, assess and control hazards
- Licenses
- Model WHS Laws
- Safe design
- Model Work Health and Safety Laws
Page last updated: 06 Dec 2021
05 September 2014 |
Guidance materials
This Guide provides information on managing the risks of unauthorised persons working near low voltage overhead service lines near structures and buildings.
Document
- Cranes
- Electrical safety
- Excavation
- Health and wellbeing
- Managing health and safety
- The work environment
Page last updated: 09 Nov 2021
10 November 2014 |
Reports
This study examined 523 worker fatalities for which there was sufficient information on the circumstances to make a judgement on the contribution of unsafe design to the incident.
Of these, 63 fatalities (12%) were determined to have been either…
Document
- Disease and injury data
- Fatality statistics
- Identify, assess and control hazards
- Plant, equipment and structures
- Safe design
- All industries
- Manufacturing
- Plant, equipment and structures
Page last updated: 09 Nov 2021
19 March 2020 |
Guidance materials
Use this guide to manage risks with tunnelling work, including:
tunnel planning and preparation
air quality and ventilations systems
plant.
This guide is for:
designers
principal contractors
plant designers…
Document
- Plant, equipment and structures
Page last updated: 01 Nov 2021
19 March 2020 |
Reports
This educational resource provides guidance about work health and safety and safe work design.
It covers the evidence and theory behind the principles of good work design. Further guidance is available in:
Document
- Safe design
- Good work design
Page last updated: 27 Oct 2021
19 March 2020 |
Guidance materials
This information sheet provides information about managing the risks of trees and vegetation near overhead electric lines.
This document is part of a series which includes specific guidance on: :
scaffolding near overhead electric lines …
Document
- Cranes
- Excavation
- Electrical safety
Page last updated: 27 Oct 2021
19 March 2020 |
Guidance materials
This information sheet provides information about managing risks with scaffolding near overhead electric lines.
It is supported by the specific guidance on:
common types of scaffolds and scaffolding
suspended (swing stage) scaffolds …
Document
- Cranes
- Excavation
- Electrical safety
Page last updated: 27 Oct 2021
06 July 2021 |
Guidance materials
This information sheet provides information about managing the risks of formwork and falsework.
This document is part of a series which includes:
Document
- Slips, trips and falls
- Excavation
Page last updated: 27 Oct 2021