20 March 2020 |
Model Codes of Practice
This model Code of Practice provides guidance on managing the risk of a falls by a person from one level to another that is reasonably likely to cause injury.
It applies to all workplaces covered by the Work Health and Safety (WHS) Act and WHS …
Document
- Cranes
- Identify, assess and control hazards
- Model WHS Laws
- Safe design
- Slips, trips and falls
- Working at heights
- Managing health and safety
- Model Work Health and Safety Laws
- The work environment
Page last updated: 18 Aug 2022
01 October 2018 |
Model Codes of Practice
This model Code of Practice provides guidance on managing the risk of falls in housing construction.
In this model Code, the word:
‘should’ indicates a recommended course of action, and
‘may’ means an optional course of action.
The words ‘…
Document
- Cranes
- Model WHS Laws
- Slips, trips and falls
- Working at heights
- Model Work Health and Safety Laws
- Safety by industry and business
- The work environment
Page last updated: 18 Aug 2022
01 October 2018 |
Model Codes of Practice
Use this model Code of Practice if you design structures that will be used, or could reasonably be expected to be used, as a workplace. This includes architects, building designers and engineers.
This model Code is also relevant for anyone making…
Document
- Cranes
- Demolition
- Good work design
- Identify, assess and control hazards
- Licenses
- Model WHS Laws
- Safe design
- Model Work Health and Safety Laws
Page last updated: 18 Aug 2022
01 November 2013 |
Model Codes of Practice
If you’re a person conducting a business or undertaking (PCBU), this model Code of Practice provides practical guidance on how to effectively consult with workers about work health and safety and meet your duties under the work health and safety (WHS) Act…
Document
- Consultation
- Disease and illness
- Identify, assess and control hazards
- Law and regulation
- Leadership and culture
- Mental health
- Model WHS Laws
- Risk management
- Managing health and safety
Page last updated: 17 Aug 2022
06 July 2022 |
Guidance materials
These templates include examples of:
an HSC constitution
an HSC agenda
an HSC minutes
Note: these templates should be considered in conjunction with the information contained in Worker Representation and Participation Guide.
Document
- Managing health and safety
Page last updated: 06 Jul 2022
09 June 2022 |
Guidance materials
An industrial rope access system is a work positioning system used for gaining access to, and working at, a workface, usually through vertically suspended ropes.
The guide provides information on managing the risks associated with industrial rope access…
Document
- Personal protective equipment
- Plant, equipment and structures
- Working at heights
- Safety by industry and business
Page last updated: 30 Jun 2022
01 January 2012 |
Guidance materials
Information on the representation and participation of workers in health and safety matters at the workplace, as well as guidance on resolving health and safety issues.
Document
- Consultation
- Identify, assess and control hazards
- Law and regulation
- Leadership and culture
- Managing health and safety
Page last updated: 14 Jun 2022
19 March 2020 |
Guidance materials
This guide provides information on managing risks associated with tree trimming and removal work, includes:
lopping
pruning
trimming
repairing
maintaining
removing amenity trees
wood chipping
stump…
Document
- Electrical safety
- Working at heights
- Plant, equipment and structures
- The work environment
Page last updated: 09 Jun 2022
10 November 2014 |
Reports
This study examined 523 worker fatalities for which there was sufficient information on the circumstances to make a judgement on the contribution of unsafe design to the incident.
Of these, 63 fatalities (12%) were determined to have been either…
Document
- Disease and injury data
- Fatality statistics
- Identify, assess and control hazards
- Plant, equipment and structures
- Safe design
- All industries
- Manufacturing
- Plant, equipment and structures
Page last updated: 09 Nov 2021
01 November 2013 |
Reports
This project was undertaken by Instinct and Reason Pty Ltd under commission from Safe Work Australia. The report describes the findings of a qualitative research study on the structural metal product manufacturing industry—an industry with a high rate of…
Document
- Research
- Workers' stories
- Working at heights
- Managing health and safety
- Research and studies
- The work environment
Page last updated: 09 Nov 2021